Sanding & Finishing

Showing all 11 results


  •  

    Junckers Logo

    JUNCKERS SYLVA CLEANER is a universal cleaning agent for daily or periodic cleaning of lacquered and oiled wood floors. Junckers SylvaCleaner is developed to dissolve grime and dry quickly. The product does not leave a film on the surface.
    JUNCKERS SYLVA NEUTRALIZER is used for cleaning wood floor surfaces before retreatment with lacquer or oil. The product dries quickly and neutralizes any soap remnants from Junckers SylvaCleaner. It is not necessary to wash afterwards with water.
    JUNCKERS SYLVA POLISH is a maintenance protector that protects the sealed surface of Silk-matt lacquered floors.
    JUNCKERS SYLVA DISSOLVER H20 is a concentrated, water-based, slightly alkaline product for cleaning resin from sports floors. Junckers Sylva Dissolver H20 must be used in a floor washing machine. When the resin is removed, wash with Junckers Sylva Cleaner. We recommend following the instructions carefully with regard to max. 5 minutes soaking.

  • Junckers Logo

    • JUNCKERS BASEFILL is a quick-drying solvent-based filler to be mixed with sanding dust for filling gaps in floors up to 2 mm wide. In combination with Junckers solvent-based or water-based lacquers, is suitable for most sanded and untreated parquet floors.
    • JUNCKERS BASEPRIME is a very fast curing primer for wooden floors where water-based primers cannot be used due to poor adhesion. Ideal for exotic and oily timbers. The product gives the wood greater depth and colour. BasePrime should only be used directly on to the bare wood.
    • JUNCKERS PRELAK is a 1-component water-based primer for all wooden floors to minimise side bonding. Dries quickly and is easy to sand. PreLak can be used with Junckers 1-pack and 2-pack water based finishes.
    • JUNCKERS PRELAK WHITE is a 1-component water-based primer for all wooden floors which gives a white transparent appearance to any wood surface. On open porous wood types, PreLak White should be applied in several coats to obtain an even distribution of the pigment.
    • JUNCKERS PROSEAL is a urethane oil-based primer for Junckers Ultramatt and water-based lacquers. With Junckers ProSeal you achieve a warm colour to the timber without using solvent based products. Overcoat with Junckers water-based HP COMMERCIAL / HP SPORT.

  • • Junckers Strong is a 1-component water-based 100% polyurethane hard-wearing lacquer that leaves a low odour. The product is used on both previously finished as well as on new or sanded old floors, and is also suitable for lacquering all kinds of indoor woodwork. Residential and light commercial use only. Not suitable for sports use.
    • Junckers HP COMMERCIAL/SPORT is a 2-component water-based 100% polyurethane lacquer. The product is for high traffic areas, high durability and is a fast curing seal. Non yellowing – ready for use the next day. Junckers HP COMMERCIAL/SPORT lacquer must be mixed with Junckers HP HARDENER before use.
    • Junckers HP FRICTION+ is a 2-component water-based polyurethane lacquer high traffic finish for commercial areas. Fast curing. Ideal for use in areas where wet slip resistance is a high priority. Achieves R10 Slip Rating. Junckers HP FRICTION+ lacquer must only be used as the final coat in a
    lacquer system.
    • JUNCKERS HP ONE is a water based 1-part low-odour and hard-wearing polyurethane lacquer for previously sealed floors, untreated or machine sanded wooden floors in sport and commercial areas.

  •  

    Logo

    LAEGLER (LAGLER) – THE WORLDS LEADING MANUFACTURER OF PROFESSIONAL SANDING MACHINES

    From the legendary HUMMEL® to the single disc sanding machine SINGLE, LÄGLER offers the most comprehensive and highest quality range of machines available for professional floor finishing.

    All our floor sanding machines have the most sophisticated technology for quick, environmentally friendly and perfect finishing of wooden floors and thus offer the greatest investment security possible. Laegler are quite simply the number one brand of reliable sanding equipment in the World.

     

    SPARE PARTS AND SERVICING

    We carry a full range of machine spare parts ex stock on all machines listed above. We also offer a Service Facility on all machines to ensure your machine is working at an optimal level. Please contact Liam Boylan for Laegler enquiries. Email enquiries can be sent to liam@wrg.ie

  • JUNCKERS HP SPORTSLINE is a water-based 2-pack product for painting of court markings and other coloured areas in gymnasiums and sports halls. The product is recommended on floors coated with Junckers HP SPORT and on Junckers pre-finished lacquered floors. Available in White, Yellow, Red Blue, Green & Black.

  • A natural oil finish penetrates the timber pores as opposed to a lacquer finish which is a top surface coating. The oil finish is a low sheen matt finish and you will feel the grain of the timber. Your oiled floor should be maintained in an appropriate way as detailed below and this allows you to keep the natural look of the floor over the lifetime of the floor while also providing ongoing surface protection.


    • WOCA OIL REFRESHER/OIL REFRESHER SPRAY
    o Easy to use spray or available in dilutable format
    o Combines efficient cleaning with re-oiling as additional oil penetrates the wood of the floor forming a matt protective surface layer
    o Application: Square Mop


    • WOCA WOOD CLEANER
    o Wood Cleaner may be used for intensive cleaning cleaning of soaped, oiled and lacquered surfaces prior to refinishing
    o Not for regular cleaning
    o Used prior to re-oiling
    o Application: Mop & Bucket


    • WOCA MAINTENANCE OIL
    o Used for the maintenance of natural oiled wood floors.
    o Provides the floor with hard-wearing properties in the upper pore layer
    o Highlights natural wood grain
    o Application: Buffing Machine


    In order to keep your Natural Oiled flooring protected and looking well over its lifetime, please follow below guidelines. The recommended Woca care products should be used as they are compatible with the factory applied surface finish:

    1: IMMEDIATELY AFTER INSTALLATION
    An application of Woca Oil Refresher should be done as first treatment immediately after installation. This comes in a ready mixed 750ml spray (covers 60m²) or a 2.5 Litre can which is more concentrated (covers 250-300m²). These can be applied simply using a rectangular/square cotton cover mop (spray) or a mop and bucket (2.5 Litre concentrate). If the flooring has gotten dirty during renovation, please use Woca Wood Cleaner the day before the Oil Refresher is first applied.

    N.B. Woca Wood Cleaner is a high strength intensive cleaner and is not for general/regular cleaning. It should only be used as outlined above and as per step 3 below.

    Certain floor surfaces e.g. Oak Florence band sawn may have a dry appearance due to the rougher texture. These require an initial treatment of maintenance oil – please see step 3 below.

    2: ONGOING CLEANING & CARE
    Ongoing regular cleaning should be carried out as needed using Woca Oil Refresher as outlined in step 1. Higher traffic areas e.g hallways, kitchen areas will require more frequent cleaning. White/Grey tone floors willl require more frequent care.

    3: RE-OILING & RESTORING YOUR FLOOR
    Residentially, the floor will need to be re-oiled every 1-4 years depending on the area and level of use. When the floor needs to be re-oiled, the floor should be first washed with Woca Wood Cleaner. A buffing machine with a white pad can be used for more stubborn marks/stains.

    The following day a coat of Woca Maintenance Oil is then applied by buffing machine. It takes 1 week for the oil to fully harden. After 1 week, please follow Step 2 recommendations above for ongoing cleaning and care of your floor.

  • An oil/waxed finish penetrates the timber pores but not as deeply as a natural oiled finish. There can be a slight silk sheen off the finish which will dull down over time. It has a slightly more sealed feel to the surface than a natural oil finish. With an oil/wax finish, it is important to use the recommended maintenance products for the flooring as it provides ongoing protection to the floor surface – essentially feeding the floor.

    • WOCA HARDWAX OIL
    o For oil finishing of hardwaxed, unfinished or newly sanded wooden floors.
    o Ensures an extremely hard-wearing and light film-building surface
    o Application: Buffing Machine


    • WOCA OIL REFRESHER/OIL REFRESHER SPRAY
    o Easy to use spray or available in dilutable format
    o Combines efficient cleaning with re-oiling as additional oil penetrates the wood of the floor forming a matt protective surface layer
    o Application: Square Mop


    • WOCA WOOD CLEANER
    o Wood Cleaner may be used for intensive cleaning cleaning of soaped, oiled and lacquered surfaces prior to refinishing
    o Not for regular cleaning
    o Used prior to re-oiling
    o Application: Mop & Bucket


    In order to keep your oil/waxed flooring protected and looking well over its lifetime, please follow below guidelines. The recommended Woca care products should be used as they are compatible with the factory applied surface finish:

    1: IMMEDIATELY AFTER INSTALLATION
    An application of Woca Oil Refresher should be done as first treatment immediately after installation. This comes in a ready mixed 750ml spray (covers 60m²) or a 2.5 Litre can which is more concentrated (covers 250-300m²). These can be applied simply using a rectangular/square cotton cover mop (spray) or a mop and bucket (2.5 Litre concentrate). If the flooring has gotten dirty during renovation, please use Woca Wood Cleaner the day before the Oil Refresher is first applied.

    N.B. Woca Wood Cleaner is a high strength intensive cleaner and is not for general/regular cleaning. It should only be used as outlined above and as per step 3 below.

    2: ONGOING CLEANING & CARE
    Ongoing regular cleaning should be carried out as needed using Woca Oil Refresher as outlined in step 1. Higher traffic areas e.g hallways, kitchen areas will require more frequent cleaning. White/Grey tone floors willl require more frequent care.

    3: RE-OILING & RESTORING YOUR FLOOR
    Residentially, the floor will need to be re-oiled every 1-4 years depending on the area and level of use. When the floor needs to be re-oiled, the floor should be first washed with Woca Wood Cleaner. A buffing machine with a white pad can be used for more stubborn marks/stains.

    The following day a coat of Woca Hardwax Oil is then applied by buffing machine. It takes 1 week for the oil to fully harden. After 1 week, please follow Step 2 recommendations above for ongoing cleaning and care of your floor.

  • Junckers oils are odour free, fully curing and used for treatment and maintenance of wooden floors. When using Junckers oils, you not only maintain the floor by using the best products, you also add a rich appearance and make the floor suitable for high-wear.

    Junckers Rustic Oils gives the wood a rich, warm lustre and a deeper shade, whilst also setting off the natural grain pattern. Rustic oils are easy to work with and produce a beautiful result. Our oils make maintaining the wood easy, whilst also preserving the natural lustre of the wood.

    You can choose between several colours from our unique Soul+Collection oils to our classic looking Rustic Oils which emphasise the character of your home and harmonise with your other interior finishes.


    • JUNCKERS RUSTIC OIL is a penetrating urethane hardening oil for floors, worktops and internal surfaces. The product is unique as it can be overcoated with Junckers HP COMMERCIAL. Use Junckers Rustic Oil when the floor cannot be lacquered due to short down time i.e. in airport lounges.


    • JUNCKERS SOUL+COLLECTION Oils are used to maintain, retreat or create a Junckers Soul+Collection appearance on untreated or machine-sanded wooden floors. It can be overcoated with Junckers HP COMMERCIAL.


    • JUNCKERS PROFESSIONAL HARDWAX OIL is an incredibly durable and fast drying oil wax that can be used for untreated and sanded parquet floors. The product protects the floor and gives a warm glow to the floor. It is ideal for home or commercial wooden floors. Use Junckers Hardwax Oil when the floor cannot be lacquered due to short down time i.e. in airport lounges. The product can be used for priming and for the final polishing. An extra layer is required for porous wood types in order to achieve the desired result. Note: Hardwax Oil can not be overcoated with water-based lacquers.


    • JUNCKERS RUSTIC TOPOIL is a very fast drying, water based alkyd oil for maintenance of surfaces treated with Rustic Oils and Hardwax Oil. The floor is “walkable” after just 30 minutes.

  • Sait Logo

    Whiteriver Group, together with SAIT, offer a complete range of coated abrasives on cloth, paper and velcro backings. This is made from the highest quality abrasive products by holding the strictest standards on all raw materials. Whiteriver Group’s stock program covers all other popular sanding machines on the market so you can be confident we can offer you a full service package across all product lines.

  • • WOCA DIAMOND OIL
    o For oil finishing of unfinished or newly sanded wooden floors.
    o Ensures an extremely hard-wearing, dirt and water-repellent surface
    o Application: Buffing Machine & Patina Discs


    • WOCA HARDWAX OIL
    o For oil finishing of unfinished or newly sanded wooden floors.
    o Ensures an extremely hard-wearing and light film-building surface
    o Application: Buffing Machine


    • WOCA PATINA DISCS
    o For use with Diamond Oil to achieve closed pore finish
    o The surface is saturated immediately, becomes hard-wearing, silky smooth, and easy to maintain.
    o Application: Buffing Machine


    • WOCA MAINTENANCE OIL CARE BOX
    o The ready to go kit for maintaining your oiled floor
    o Contains: Soap 1L, Maintenance oil 1L, Wood Cleaner 1L, 1 x Cotton Cloth, 1 x Pad, 1 x Sprayer

  • A UV Oiled finish is similar in many ways to a matt varnish as the oil is hardened under UV lights during the finishing process. Eventually the surface will wear down similar to a varnish.

    In order to keep your UV Oiled flooring protected and looking well over its lifetime, please follow below guidelines. The recommended Woca care products should be used as they are compatible with the factory applied surface finish:

    • WOCA SOAP/ SOAP SPRAY
    o Pre-mixed soap in a easy to use spray bottle or available in dilutable format
    o Quick and convenient for regular cleaning
    o Just spray and mop off
    o Ideal for DIY cleaning
    o Application: Square Mop


    • WOCA WOOD CLEANER
    o Wood Cleaner may be used for intensive cleaning cleaning of soaped, oiled and lacquered surfaces prior to refinishing
    o Not for regular cleaning
    o Used prior to re-oiling
    o Application: Mop & Bucket


    • WOCA OIL REFRESHER/OIL REFRESHER SPRAY
    o Easy to use spray or available in dilutable format
    o Combines efficient cleaning with re-oiling as additional oil penetrates the wood of the floor forming a matt protective surface layer
    o Application: Square Mop


    1: IMMEDIATELY AFTER INSTALLATION
    We recommend an application of Woca Soap or Woca Soap Spray as first treatment immediately after installation. This comes in a ready mixed 750ml spray (covers 60m²). These can be applied simply using a rectangular/square cotton cover mop (spray) or a mop and bucket (2.5 Litre concentrate). If the flooring has gotten dirty during renovation, please use Woca Wood Cleaner the day before the Oil Refresher is first applied.

    N.B. Woca Wood Cleaner is a high strength intensive cleaner and is not for general/regular cleaning. It should only be used as outlined above.

    2: ONGOING CLEANING & CARE
    Ongoing regular cleaning should be carried out using Woca Soap. This can be applied simply using a rectangular/square cotton cover mop (spray) or a mop and bucket (2.5 Litre concentrate). The 750ml DIY Ready Mixed Woca Soap is pre-mixed and ready to use (covers 60m²). This is very much geared for DIY application. The 2.5L Soap concentrate is mixed with wate in a bucket and covers 250-300m².

    3: RE-FINISHING & RESTORING YOUR FLOOR
    The UV hardened oil finish will have a similar lifespan to a varnished/lacquered floor but will eventually need to be sanded in the future. After sanding you have a range of re-finishing options available to you:

    a: Natural oil
    b: Hardwax oil
    c: Lacquer/Varnish


Showing all 11 results

Contact Info

Phone: +353 41 686 1000
Fax: +353 41 686 2909
Email: sales@wrg.ie

About White River Group

Wholesale distributors of quality timber products in Ireland supplying the trade. Recognised as one of the leading importers and distributors of interior and exterior timber products in Ireland.

NEWSLETTER SIGNUP

Be the first to know about our new products and offers. Submit your email address:
Top